What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 22.06.2025 01:31

This is where the MOV conducts again, and dissipated the energy.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
How and why do cats purr? Scientists finally found the answers - Earth.com
A fuse is a non-resetable over current circuit protector.
nine
An AC voltage/ current source, and an ac inductive load.
What was the hottest inappropriate sex you ever had?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
The MOV will conduct when the voltage exceeds 50% of line voltage.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
How cultural transmission changed across 3.3 million years of human evolution - Phys.org
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
(Dc diagram shown, AC is similar).
The other is “what does a “fuse” do?”
I've never read the book. What did Dorian Grey do that was so immoral and sinful?
A circuit breaker is similar, but is resettable.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
What is the word for truth and its meaning in Koine Greek?
He then asserts :
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
So, the voltage could go up to 500 volts, and the fuse will not open up.
It also is a device that limits the change in current flow.
Upvotes:
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Fred Espenak, astronomy's 'Mr. Eclipse', dies at 71 - Space
[image of Common-mode choke]
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
but I think this circuit , shows a few more pieces.
Police chief Grant Hardin caught after escaping Arkansas prison - BBC
Now when you have a certain ac resistance, then a current flows in a loop.
but this device (an Inductor) … impedes the rapid changes in the current.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
How to Make AI Faster and Smarter—With a Little Help from Physics - WIRED
a photo is worth a thousand words.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
At least they know the answer if they wanted it.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
These are simplified answers to the original question, and does not change anything I wrote above.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
An old Capitol Hill troublemaker is trying to clinch a megabill deal - Politico
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This one hit behind the barn.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
He then describes Rainy Season and Lightning.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
2024–10–16 [ OO OLAOYE OYEBODE ]
He then describes the function of a fuse.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
[old diagram got deleted by accident]
It seems Mohan does not understand the difference between a comment and an Answer.
But… the neutral is now “floating” because of the 1 ohm resistance.
In schematic diagrams this is the symbol for a fuse:
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Because the load is inductive, the current lags the voltage.(by a bit).
This is where this question deviates from being a 'generic' question, and becomes more specific.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
eight
Barnstars:
At one ohm, the resistor has a maximum of 1 watt power.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
For this case there are devices called Metal oxide varistors (MOV).
There are three different concepts here that are getting confused.
I post the exact comment here.
There are two important concepts here.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
But it can get overloaded, and no longer works.
The bolt then partially travels down the line to your home.
This device then solves the entire problem.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
What is lightning?
This is 'the assistant's answer'
2024–10–10[John johnson John Johnson ]
One
One is “what exactly is in a ‘surge protector’ ? ”
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
First Sentence:
The third is lightning and “how it gets conducted into a home.”
What does a fuse do?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Edit 2024–10.
These devices are installed between the “hot” and “neutral” and protective ground.
Here is a simplified AC power diagram.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
so, what happens?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
the problem then depends on "how fast does the fuse operate?".
what exactly is a ‘surge’ protector?